How to port Clockworkmod version 6 (Carliv Touch Recovery) to MTK Android phones
We dropped a guide on how to port Clockworkmod recovery version 5 to your MTK Android (e.g Tecno, Gionee, Infinix, Opsson, TLC, Lead1, Innjoo etc ) phones (see http://www.michelleaigbe.com/2016/02/tutorial-how-to-manually-create-flash.html ) . Now, its time to upgrade your MTK phone's recovery mode to Clockworkmod version 6 (Carliv Touch Recovery) . Note that this method is the same for other MTK based phones.
Requirements
* USB debugging enabled on the phone (Settings > Developer . If no Developer under Settings, go to Settings > About > Keep tapping Build Number till Developer appears under Settings)
* USB cord
* A PC
* ADB and MTK drivers installed on PC (see http://www.michelleaigbe.com/2016/02/tutorial-how-to-easily-install-mtk.html )
Procedure
1. Download CTRv2.2.zip from the attachment below
2. Extract the content of CTRv2.2.zip to a folder
4. Enable USB debugging on the phone then connect it to the PC
5. Temporarily disable your Antivirus
6. Launch CTRv2.2.exe as Administrator on your PC
7. CTRv2.2.exe will be automatically copied to your desktop. Click Ok to proceed
8. Click Yes to disable UAC
9. Click Yes for Auto-Port
10. Ensure the phone is connected to the PC with USB debugging enabled then click Ok
11. The Tool will Auto-detect your Chipset. you could click Ok or just leave it as it will automatically proceed
12. The Tool will Auto-detect your Partition type. you could click Ok or just leave it as it will automatically proceed
13. The Tool will Auto-detect your Screen resolution. you could click Ok or just leave it as it will automatically proceed
14. The Tool will prompt you to reboot in recovery mode. you could click Ok or just leave it as it will automatically proceed
15. If porting of Clockworkmod 6 (Carliv Touch Recovery) to the MTK phone was successful, you will get a prompt confirming the success
16. Congratulations! You now have Clockworkmod Version 6 on your MTK phone
Requirements
* USB debugging enabled on the phone (Settings > Developer . If no Developer under Settings, go to Settings > About > Keep tapping Build Number till Developer appears under Settings)
* USB cord
* A PC
* ADB and MTK drivers installed on PC (see http://www.michelleaigbe.com/2016/02/tutorial-how-to-easily-install-mtk.html )
Procedure
1. Download CTRv2.2.zip from the attachment below
2. Extract the content of CTRv2.2.zip to a folder
4. Enable USB debugging on the phone then connect it to the PC
5. Temporarily disable your Antivirus
6. Launch CTRv2.2.exe as Administrator on your PC
7. CTRv2.2.exe will be automatically copied to your desktop. Click Ok to proceed
8. Click Yes to disable UAC
9. Click Yes for Auto-Port
10. Ensure the phone is connected to the PC with USB debugging enabled then click Ok
11. The Tool will Auto-detect your Chipset. you could click Ok or just leave it as it will automatically proceed
12. The Tool will Auto-detect your Partition type. you could click Ok or just leave it as it will automatically proceed
13. The Tool will Auto-detect your Screen resolution. you could click Ok or just leave it as it will automatically proceed
14. The Tool will prompt you to reboot in recovery mode. you could click Ok or just leave it as it will automatically proceed
15. If porting of Clockworkmod 6 (Carliv Touch Recovery) to the MTK phone was successful, you will get a prompt confirming the success
16. Congratulations! You now have Clockworkmod Version 6 on your MTK phone
Post a Comment