STEPS ON HOW TO ROOT ALMOST ALL TECNO PHONES..

STEPS ON HOW TO ROOT ALMOST ALL TECNO PHONES..

(1) ROOT Tecno P5, S3, S5, P9 (4.2), M7, D7 and M3 (4.2) Q1, N7,
D1, D5, M5 (4.2),
Procedure:

1. Download Framaroot 1.6 to your device
2. Launch and Install Framaroot
3. Click on Install Supersu
4. Click on Boromir
5. You are rooted


(2) ROOT Tecno F6, P6, H3, H6, L7, L6, P9(4.4), M6, P5 Plus (4.4),
M3 (4.4), Phantom Z (A7), J7, Y6, Y3
PROCEDURE:

1. Download Kingroot
2. Install the app on the phone
3. Ensure you have an internet connection on the phone then
launch the app
4. Wait for all checks to be complete
5. Click the center button (with Root and some Chinese texts
inscribed on it) to begin rooting
6. Wait for rooting to complete
7. You should see a green tick to confirm that rooting was
successful.

(3) How to root Tecno R7, H5, H7
PROCEDURE:

1. Download Framaroot 1.9 to your device
2. Launch and Install Framaroot
3. Click on Install Supersu
4. Click on Barahir
5. You are rooted

(4) How to root Tecno M9 (A3) , F5
PROCEDURE:

1. Download Vroot
2. Enable USB Debugging on the phone (Settings > Developer OR
Settings > About > Keep clicking Build Number > Back to Settings
> Developer)
2b. Install PdaNet on the PC with phone connected to PC via USB
fellow instrution & install the driver
3. Install Vroot on the PC
4. Launch Vroot and ensure you have an internet connection
5. Ensure the phone is still connected to the PC
6. Wait for Vroot to detect the phone
7. Click the Root button to begin the rooting process
8. The phone will be rebooted once rooting is complete
9. Done

(5) How to root Tecno N3 and P3
PROCEDURE:

1. Download POOT
2. Go to settings on the phone > Application: check unknown
source > tap preferred install location> select internal device
storage > tap development > check USB debugging > Allow mock
locations Internet access on the phone.
3. Now you are ready for the main rooting. To root your Tecno
phone
4. Go to file explorer on your phone
5. Locate the poot application you downloaded above,
6. Click on it and install it to phone memory.
7. After installing open the installed poot application from your
menu icon
8. It will request to download ministro services
9. Download and install Ministro II library from Google play store.
10. Now go back to open the poot application again
11. It will ask to update QT libraries, do that and your phone
should restart automatically
12. If it doesn\'t, restart it yourself.
13. Now remove your memory card and boot the phone without a
memory card.
14. Immediately the phone gets to home-screen quickly go tap on
the poot application and tap on \'press here to poot\'
15. After the above step your phone should shut down
automatically (if it doesn\'t, restart your phone and repeat from
step 5).
16. After the phone goes off, it should come back, but if it does
not you have to remove the battery and put it back, then start it.
17. Now again quickly tap on the poot aplication immediately your
phone gets to the home-screen
18. If every thing goes well then you should see an option to
download super user and root checker
16. If not try the steps again till you see
this two options.
17. Now download and install the super user and
root checker from the link on poot.
18. Open up root checker and click verify to check
the status of your phone.
19. You should see \'congratulation your phone has root access\'
20. If you get demon materialized while pooting, simply restart and
keep trying.
21. If you\'re still having issues with poot then use Kingo Root..

(6) How to root Tecno D9, Phantom pad II (G9)
PROCEDURE:

1. Download Root Master
2. Install it on the phone
3. Ensure you have an active internet connection then launch it
4. Click the Root button
5. Give it a few seconds and your phone should now be rooted

(7) How to root tecno L3
PROCEDURE:

To root your Tecno L3, you\'ll need:
1. A Computer and USB debugging enabled on your L3
2. A USB cable to connect the Tecno L3 to the
computer
3. Download SHUAME
4. Internet connection
Follow these steps carefully.
- After the download of shuame on your PC, install it
- Connect your TECNO L3 and Launch SHUAME
allow the shuame load the phone name and build etc.
now click on what is circled in the picture below
Note: if you see the red alert on the -~# Root it
simply means you have not been rooted and also
that you can root the phone using the software. but if not either
you have been rooted or you cant root
your device with the software.
After few minutes you should get this screen
After rooting you should have
Congrats, your L3 is rooted

(7) How to root Tecno Phantom A, A+ , A2, B3, N9, S7, S9 and D3
PROCEDURE:

* Download Eroot
* Download PdaNet
* Enable USB debugging on the phone (Settings > Developer > Tick
USB Debugging)
* Connect the phone to the PC then install PdaNet, you should get
a \" rivers successfully installed\" message at the end of
installation
* Launch Eroot
* A root button will appear. If it doesn\'t, close
the PdaNet running from your system tray.
* Click on the root button and your phone will be...